Used in industry for cleaning, polishing, satin finishing and sandblasting of a very wide range of pieces in any type of material.
All the existing abrasives can be used and depending on the finishing result you want to obtain, you can choose booths with a suction or pressure abrasive launch system.

Suction ( Venturi ) type
Sandblasting takes place using a special gun to which two distinct pipes arrive.
One pipe, controlled by a pedal, is supplied with compressed air while the other pipe is connected to the abrasive tank. The jet of compressed air creates a vacuum inside the gun which sucks the abrasive through the tube connected to the tank.
Arrived at the gun, the abrasive is fired through the tungsten carbide nozzle.
Especially suitable for polishing and satin finishing of the pieces, they are limited in the use of the types of abrasive.
The suction system does not allow the use of metal grit and has a lower yield in the unit of time with the same consumption of compressed air compared to the pressure system.

Pressurized type
Sandblasting takes place using a lance which is connected to a tank containing the abrasive via a tube.
Pressuring the tank pushes the abrasive up to the lance from which a jet of great power and high working capacity comes out.
With the same air consumption, the pressure booths have a yield 4 times greater than a corresponding suction machine. It is possible to use metallic abrasive and they are therefore suitable for sandblasting, paint stripping and in all those applications where a more aggressive finish is required.
All LAMEF cabins can be equipped with numerous accessories.